Release Notes for Software 3.4.1 for ECoS 50200 / ECoS 50000 / Central Station Reloaded 
=======================================================================================

- BUGFIX: Problems with network connection to PC programms: ECoS/CS crashes sporadically during operation
- BUGFIX: Edit loco: Readout of NMRA profiles causes errors
- BUGFIX: SwitchPilot/SwitchPilotServo programming in servicemode is not relieable
- BUGFIX: ECoSLink: Update causes crash
- BUGFIX: ECoSLink: Update window below "Help"-window
- BUGFIX: Motorola programming (6021-Mode) does not work with 3rd party decoders
- BUGFIX: Signal BE: State 3 wrong
- BUGFIX: M4 loco with 28 Speedsteps: Speedstep 1 is displayed as 0km/h
- BUGFIX: Edit loco: V4-Mapping is sometimes displayed when M4 loco is edited
- BUGFIX: Distant signals: Semaphore with 3 states with false control logic
- BUGFIX: Track layout: "Disappearing" items in track layout
- BUGFIX: Text "Reset ECoS" changed to "Restart ECoS"
- BUGFIX: LokPilot2 M4: Programming problems
- BUGFIX: ECoSControl Radio: Speed is not updated when "Allow takeover of locos by other controllers" is enabled
- BUGFIX: ECoSControl Radio: 28 speedsteps for M4 is now displayed as 28 speedsteps on the ECoSControl Radio
- BUGFIX: Webinterface: Page selection of loco images displayed wrong
- BUGFIX: Setup: Track signals: If all track signals are deselected, the CS crashes(CS Reloaded only)
- BUGFIX: Assymmetric track signal does not work
- BUGFIX: Functions 20 und 21 do not create view updates on the PC interface
- ADD: ECoSDetector support
- ADD: Setup: DCC programming: Permanent programming track enable now optional. Solves problems when programming some accessory decoders or installed loco decoders (e.g. in locos with PowerPack)
- ADD: RailComPlus: New loco with address already assigned to another loco: Keep address and delete old loco as an option
- ADD :Track layout: Last track layout page will be remembered
- ADD: Track layout: Sort pages
- ADD: Setup: DCC programming: Pass read value to "Write value"-box

Please note:
In some cases, the s88-feedback is not recognized correctly after the software-update. Rebooting the device will fix the behaviour. Althogh, in few cases, deleting ("-") and re-entering ("+") the s88-Modules via "Setup"-"Devices on ECoSlink"-"s88 bus configuration" will be necessary.